Software Version This code shows you software version, date of manufacture and hardware model number of your phone.

* # 8110 #
Show IMEI code If you need to know what's the IMEI code of your phone, simply press:

* # 06 #

you'll read it on display.
Show warranty information To get additional information from your phone you can use the so called "warranty codes", try typing:

*#92702689#    (= *#war0anty#).

You will be asked a 'warranty code:' type:

6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer

Sim Clock information To check if the Sim-Clock can be stopped  type:

*#746025625#    (= *#sim0clock#)
Pin-Out 
Desktop Charger----------------------|
             |                       |
             |                       |
CHARGER--|   +      TOP OF PHONE     -
         V   V    1  2  3  4  5  6   V  
        (o) | |  [=  =  =  =  =  =] | |
                7  8  9  10 11 12   
1   - Charger/System Ground
2   - Accessory Output Supply. (3.4V...10V - 50mA)
3   - External Microphone Input and Accessory Identification
       *1,7...2,05 V Headset Adapter Connected
       *1,15...1,4 V Compact Handsfree Unit Connected
       *2.22...2.56 V Infra Red Link Conneceted
4   - External RF Control Input
       *0...0.5V External RF in use
       *2.4...3.2V Internal Antenna in use
5   - FBUS Transmit
6   - Serial Control Bus
       *Logic Low Level: 0....0.5V
       *Logic High Level:2.4V....3.2V
7   - Not Connected
8   - Signal Ground
9   - External Speaker and Mute Control
       Mute ON (HF SPEAKER MUTE ):0...0,5 V d.c.
       Mute OFF (HF SPEAKER ACTIVE ): 1,0...1,7 V d.c.
10 - Hook Signal
       *Hook Off (Handset in Use): 0....0.5V
       *Hook On (Handset in Use): 2.4V....3.2V
11 - FBUS Receive
12 - Charging Supply Voltage (Max 16V)
Find your lost security code Forgotten your security code?

First of all, find out your IMEI code and write down it.

Then type download SID.exe and use it in conjunction with IMEI code you found.

Just remember if you got a a IMEI number that ends with something different from '0' you got to replace this with '0' when typing it into the sid.exe program to get the right code.
Nokia Cellular Data Suite Want to use your laptop to send fax and data with your 8110's Nokia Phone ?

Here is what you need: the Nokia Cellular Data Suite ready to be downloaded!

There are three files, unzip them with "-d" option and then run setup.

P.S. If you need the cable to connect phone and PC, build your own! you'll find all needed info in the "Hardware" link.
PC Calendar Keep you organized with PC Calendar.